Interior & Sanitary Protector EcoCare, 500ml

Nano Interior & Sanitary Protector – Simple and Long-Lasting Protection

After a new interior design or thorough cleaning, the eye is drawn to a clean and bright home. Unfortunately, such a result will not last forever, but by using the right care products and simplifying future cleaning, it is possible to significantly extend it. Furthermore, less scrubbing and processing of surfaces and materials is required, which extends their life.

GoGoNano products are aimed at customers who value comfort and quality. EcoCare bathroom protector keeps kitchen surfaces, bathroom wall and floor tiles, shower corner, sink, and other surfaces cleaner and visibly brighter for longer.

It is obvious that different materials require different care, and not all universal cleaning agents are appropriate for this. In this case, it would be necessary to stock up at home with a product designed for each surface separately, which can be costly. Furthermore, with such a minor issue, it is worthwhile to consider the big picture of the world. At least half of common household chemical products contain toxic to the environment and health substances that pollute air, water, and living organisms. Having a beautiful home, on the other hand, does not have to come at the expense of someone else.

To avoid overburdening the shelf of household chemicals and nature, we made EcoCare suitable for use on as many surfaces as possible: glossy, matte, natural, and non-slip. There is no need to wear protective gloves or worry about harming nature when using the product because it is water-based and thus completely safe for skin, materials, and the environment.

Thanks to its nanotechnological composition, it provides more durable surface protection than many other products on the market. The coating forms a water- and dirt-repellent, breathable layer without altering the surface finish, while helping to restore a fresh appearance. In humid environments like bathrooms and showers, this layer effectively prevents the formation of limescale and mold by stopping moisture and microbes from penetrating porous materials, such as tile grout.

❗IMPORTANT: Not suitable on glass! We recommend using EcoGlass natural glass cleaner on glass!

How to use EcoCare nano bathroom protector?

EcoCare is incredibly simple to use. To achieve the best results, the surfaces must be completely clean and dry before application. We recommend using EcoClean to remove general dirt and grease. It is crucial that the surface is also entirely free of existing limescale and mold, as the coating only prevents new formation and does not remove existing buildup.

To remove limescale prior to coating, we recommend using a dedicated product like EcoDescaler. Once the surface is fully prepped, shake the bottle thoroughly and apply the product directly to the surface using a soft microfiber cloth. Allow the protective agent to work for about 10-15 minutes. After that, use a microfiber cloth or paper towel to remove the residue from the treated surface.

The product is meant to be used on a regular basis. There is no reason to repeat the process before three months have passed.

Correct dosing of the protective agent is also important. If you use too little EcoCare bathroom protector, it may not do its job well enough. However, too much can cause unwanted drips and residue. You will achieve good efficiency if you use about 10 ml / m2.

Use EcoCare nano interior & sanitary protection agent:

• In the bathroom: sinks, wall and floor tiles, tile grout, and toilets
• In the kitchen: work surfaces, sinks, floor and wall tiles, and tile grout
• On the dining table, sofa table, children’s desk
• In the hall closet, on the shelves
• On doors, as well as around handles or knobs
• On all other hard surfaces (except glass) that are frequently used or exposed to dirt

Safety: Not a hazard product. Keep out of reach of children. Consumption: About 10 ml / m2.

❗IMPORTANT: Always Test First!
Due to the wide variety of hard surface materials and their diverse proprietary factory finishes or treatments, we strongly recommend testing our nano coating on a small, inconspicuous area before full application. Allow the test area to fully dry and cure (as per product instructions) and observe for 24-48 hours to ensure compatibility and desired results.