EcoGlass Protector – Nano Glass Coating, 500 ml

Nano Glass Coating for Windows, Mirrors, and Shower Cabins

GoGoNano EcoGlass Protector seals the microscopic pores in glass with an advanced nano glass coating, creating an invisible barrier that stops dirt, hard water, and soap scum from bonding to the surface. The result: everyday cleaning takes significantly less time and requires no harsh chemicals.

Anti-Corrosion and Dirt Resistance

Untreated glass degrades over time. Mineral deposits from hard water penetrate the surface, causing cloudiness and corrosion that becomes harder to remove with each cleaning. The nano coating bonds directly to the glass, providing active anti-corrosion protection and preserving long-term clarity. Dirt, soap scum, and limescale have far less to grip onto, so they rinse or wipe away with minimal effort instead of building up into stubborn deposits.

On shower cabins and exterior windows, this reduces how often the glass needs attention and keeps surfaces transparent for longer.

Where to Use It

Apply EcoGlass Protector to any interior or exterior glass installation — bathroom mirrors, shower enclosures, glass sauna doors, exterior windows, and glass-ceramic stovetops. The water-based, PFAS-free formula is safe for use in enclosed spaces like bathrooms and does not damage surrounding materials or sealants.

How to Apply

A clean surface is the key to long-lasting results. The nano-coating requires a completely clean and grease-free surface to bond properly. To remove everyday dirt and grease streak-free, GoGoNano EcoGlass is perfect. However, if your glass has stubborn limescale or hard water stains, we highly recommend pre-treating the surface with GoGoNano EcoDescaler. Proper surface preparation guarantees the maximum lifespan of the coating.

1. Clean the glass thoroughly and allow it to dry completely.
2. Shake the protector bottle well before use.
3. Spray evenly until the glass is well moistened.
4. Spread the liquid across the surface using a dry sponge or microfiber cloth.
5. Allow to dry fully, then buff clear with a clean microfiber glass cloth.

How Long the Coating Lasts

EcoGlass Protector is designed for periodic reapplication rather than a one-time treatment. How long the coating performs depends on how heavily the glass is used and how quickly dirt and mineral deposits build up again — every nano coating wears down gradually through cleaning, exposure, and mechanical contact.

As a general guide:

• Showers & Sauna doors (high load) — reapply every three to six months, or once per quarter in households with hard water.
• Exterior windows — twice a year is usually enough.
• Mirrors and low-contact glass surfaces — reapply when cleaning starts to take noticeably more effort than before.

The clearest sign that reapplication is due: dirt, soap scum, or limescale start sticking to the glass again and cleaning requires more scrubbing than it used to. Maintain the coated surface between applications by wiping with a damp microfiber cloth. Avoid abrasive cleaners and scouring pads — they wear down the protective layer and shorten its lifespan.